IC Realtime 1U POE NVR Series, Руководство пользователя

Страница: 169 / 291

Parameter Description
Record Channel
This allows channels to record when the event occurs. Select the
check box and then select the channel(s) to be recorded.
You will need to set up the appropriate record schedule prior. For
details, see "4.1.4.6 Schedule".
PTZ Activation
Select the check box and click Setting to select the channel and PTZ
action. When an event occurs, the NVR will have the selected channel
perform the corresponding PTZ action. For example, activate the PTZ
in channel one to turn to the preset point X.
● Tripwire events only supports PTZ preset point activation.
● Corresponding PTZ actions must be configured prior, see
"4.4.4 Calling PTZ Functions".
Delay
At the end of the alarm, the recording extends for a period of time.
The time range is from 10 seconds to 300 seconds.
Tour
Click to select the check box and then select the channel(s) for tour.
When the event is triggered, the local interface of the NVR device
will display the selected channel(s) on the screen.
● you will need to set the time interval and mode for tour first,
see "4.17.2 Tour".
● After the tour ends, the previous screen split mode will resume.
Log
Select the check box, the NVR device records the alarm information in
the log when an alarm event occurs.
Voice Prompts
Check the box and then select the corresponding audio file from the
dropdown list. The NVR plays the audio file when the alarm occurs.
Refer to "4.18.1 File Management" to add audio file first.
Buzzer Select the check box to activate the onboard buzzer when an event
occurs.
Step 8 Click Apply .
4.7.2.8 Heat map
Heat map technology monitors the human traffic distribution in the specified zone during a
period of time and uses different colors to display on a heat map report.
Step 1
Select Main Menu > Advanced Settings > Alert Center > Parameters > Heat Map .
The Heat Map interface will be displayed. See Figure 4-162.
158