IC Realtime 1U POE NVR Series, Руководство пользователя

Страница: 166 / 291

Table 4-48
Parameter Description
Channel Select a channel from the dropdown list.
Enable Check the box to enable the function.
Rule Type Select a people counting rule type.
Rule Click RULE to set statistics region, name, direction.
Alarm
Click Setting to set alarm parameters.
OSD Overlay: Toggles a people counter on the OSD.
Entry No.: Configures the people entry amount. The NVR can
generate an event once the amount has exceeded the threshold.
Exit No.: Configures the people exit amount. The NVR can
generate an event once the amount has exceeded the threshold.
Remaining No.: Configures the number of people allowed to loiter
within the zone. The NVR can generate an event once the amount
has exceeded the threshold.
Period
Configures the date/time schedule when the function will be
active.
Alarm Out
When the event is triggered, this will trigger an alarm device (such
as lights, sirens, etc.) connected to the NVR alarm output port.
Latch
When the event ends, the alarm will extend for the specified time.
The time range is from 0 seconds to 300 seconds.
Alarm Upload
When an event occurs, the NVR uploads an alarm signal to the
network (including the alarm center).
● Not all NVR models support this feature.
● you will need to set the alarm center first. For details, see
"4.12.13 Alarm Center".
Send Email
When selected, the NVR sends an Email to the set receivers when
the event is triggered.
Email settings must be configured prior. For details, see "4.12.10
Email".
Record Channel
Select the check box and select the needed recording channel
(support multiple choices). when an event occurs, the NVR device
activates the channel for recording.
you will need to enable intelligent recording and auto recording first.
For details, see"4.1.4.6 Schedule".
155