
8
Instruction Manual C100
For more information refer to the AE1 manual, document no. D2F330 001
2.4 Connecting the pneumatic transducer AE1
2.5 Linking several column gauges and connecting analogue voltages
Linking of several column gauges and connecting analogue voltages is done with the help of the CA2 and
CA4 adapters, which are connected at the rear of the column gauges. The potentiometers mounted in the
adapters allow an individual adjustment of incoming measurement signals.
Pin assignments are shown in chapter 6.1 and 6.2
In
the
Probe mixing
menu the two inductive probe inputs have the addresses A and B on the B/C100-
ind2 module. Both analogue inputs have the addresses C and D. On the measuring module B/C100-
ana4, the 4 analogue inputs have the addresses A...D.
Notice :
An analogue output may be
simultaneously connected to several
inputs (max. 3).