IBM xSeries 342 2RX, Руководство по обслуживанию

Страница: 51 / 158

v
A removed hot-swap drive is replaced within two minutes of removal.
v
Cables for optional adapters are routed according to the instructions provided
with the adapters.
v
A failed fan is replaced within 48 hours.
Working inside a server with power on
Your server supports hot-plug, hot-add, and hot-swap devices and it is designed to
operate safely while turned on with the cover removed. Follow these guidelines
when you work inside a server that is turned on:
v
Avoid loose-fitting clothing on your forearms. Button long-sleeved shirts before
working inside the server; do not wear cuff links while you are working inside
the server.
v
Do not allow your necktie to hang inside the server.
v
Remove jewelry, such as bracelets, necklaces, and loose-fitting wrist watches.
v
Remove items from your shirt pocket (such as pens or pencils) that could fall
into the server as you lean over it.
v
Take care to avoid dropping any metallic objects, such as paper clips, hair pins,
or screws, into the server.
Handling static-sensitive devices
Static electricity, though harmless to you, can seriously damage server components
or options.
Note: When you are adding an internal option, do not open the static-protective
package containing the option until you are instructed to do so.
When you handle options and other server components, take these precautions to
avoid damage from static electricity:
v
Limit your movement. Movement can cause static electricity to build up around
you.
v
Always handle components carefully. Handle adapters, the memory board, and
memory modules (DIMMs) by the edges. Never touch any exposed circuitry.
v
Prevent others from touching components.
v
When you are installing a new option, touch the static-protective package
containing the option to a metal expansion-slot screw or other unpainted metal
surface on the server for at least two seconds. (This reduces static electricity
from the package and from your body.)
v
When possible, remove the option and install it directly into the server without
setting the option down. When this is not possible, place the static-protective
package that the option comes in on a smooth, level surface and place the option
on it.
v
Do not place the option on the server’s covers or any metal surface.
Installing options
43