IBM xSeries 230 6RY, Руководство по техническому обслуживанию аппаратной части

Страница: 143 / 194

Error Code/Symptom FRU/Action
161 (Real time clock battery error)
1. Run Configuration/Setup
2. Battery
3.
System Board
162
(Device Configuration Error)
Note: Be sure to load the default settings and
any additional desired settings; then, save the
configuration
1. Run Configuration/Setup
2. Battery
3. Failing Device
4. System Board
163 (Real-Time Clock error)
1. Run Configuration/Setup
2. Battery
3. System Board
164 (Memory configuration changed, see
″
Memory settings
″
on page 34.)
1. Run Configuration/Setup
2. DIMM
3.
System Board
175 (Hardware error)
1. System Board
176 (Computer cover or cable cover was
removed without a key being used)
1.
Run Configuration/Setup
2. System Board
3. C2 Security Switch
177, 178 (Security hardware error)
1. Run Configuration/Setup
2. System Board
184 (Power-on password corrupted)
1. Run Configuration/Setup
2. System Board
185 (Drive startup sequence information
corrupted)
1. Run Configuration/Setup
2.
System Board
186 (Security hardware control logic failed)
1. Run Configuration/Setup
2. System Board
187 (VPD serial number not set.)
1. Set serial number in Setup
2. System Board
188 (Bad EEPROM CRC #2)
1. Run Configuration/Setup
2. System Board
189 (An attempt was made to access the
server with invalid passwords)
1. Run Configuration/Setup, enter the administrator password
201 (Memory test error, see
″
Memory
Settings
″
on page 34.) If the server does not
have the latest level of BIOS installed, update
the BIOS to the latest level and run the
diagnostic program again.
1. DIMM
2.
System Board
229 (Cache error)
1. Processor
2. Optional Processor (if installed)
3. System Board
262 (DRAM parity configuration error)
1. Run Configuration/Setup
2. Battery
3.
System Board
Symptom-to-FRU index
135