IBM xSeries 230 6RY, Руководство по техническому обслуживанию аппаратной части

Страница: 138 / 194

Error Code/Symptom FRU/Action
001-250-000 (Failed System Board ECC)
1. System Board
001-250-001 (Failed Processor Board ECC)
1. System Board
005-XXX-000 (Failed Video test)
1. System Board
011-XXX-000 (Failed COM1 Serial Port test)
1. System Board
011-XXX-001 (Failed COM2 Serial Port test)
1.
System Board
014-XXX-000 (Failed Parallel Port test)
1. System Board
015-XXX-001 (Failed USB test)
1. System Board
020-XXX-000 (Failed PCI Interface test)
1. System Board
020-XXX-001 (Failed Hot-Swap Slot 1 PCI
Latch test)
1. PCI Hot-Swap Latch Assembly
2. System Board
020-XXX-002 (Failed Hot-Swap Slot 2 PCI
Latch test)
1. PCI Hot-Swap Latch Assembly
2.
System Board
020-XXX-003 (Failed Hot-Swap Slot 3 PCI
Latch test)
1. PCI Hot-Swap Latch Assembly
2. System Board
020-XXX-004 (Failed Hot-Swap Slot 4 PCI
Latch test)
1. PCI Hot-Swap Latch Assembly
2. System Board
030-XXX-000 (Failed Internal SCSI interface
test)
1. System Board
030-XXX-00N (Failed SCSI test on PCI slot
N. Check system error log before replacing
a FRU.)
1. Adapter
035-XXX-099
1. No adapters were found.
2. If adapter is installed re-check connection.
035-XXX-S99 (Failed RAID test on PCI slot
S. Check System Error Log before replacing
a FRU.)
1. Cable
2. SCSI Backplane
3. Adapter
035-XXX-SNN (Check System Error Log
before replacing a FRU. NN = SCSI ID of
failing fixed disk.)
1. Fixed Disk with SCSI ID NN on RAID adapter in PCI slot S.
035-253-S99 (RAID adapter initialization
failure)
1. ServeRAID Adapter in slot S is not configured properly.
Obtain
the basic and extended configuration status and refer to the
ServeRAID Hardware Maintenance Manual for more information.
2.
Cable
3.
SCSI Backplane
4. Adapter
075-XXX-000 (Failed Power Supply test)
1. Power Supply
089-XXX-001 (Failed Microprocessor test)
1. VRM 1
2. Microprocessor 1
089-XXX-002 (Failed Optional
Microprocessor test)
1. VRM 2
2. Microprocessor 2
130
Hardware Maintenance Manual: xSeries 230 Models 6RY, 61Y