IBM xSeries 100, Руководство по диагностике и обслуживанию

Страница: 84 / 126

Removing a drive in bay 1, 2, or 3
To remove a drive from bay 1, 2, or 3, complete the following steps.
Drive retainer
clip
Release buttons
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 55.
2. Turn off the server and all peripheral devices; then, disconnect the power cords
and all external cables.
3. Remove the cover (see “Removing the cover” on page 57).
4. If you are removing a diskette drive from bay 3, remove the bezel (see
“Removing the bezel” on page 59).
5. Disconnect the cables from the drive to be removed.
6. Press the blue latch to release the drive; then, grasp the drive and pull it out of
the front of the server.
7. If you are replacing the drive with a new drive, remove the drive retainer clip
from the side of the drive and save it for installation on the replacement drive.
8. If you are instructed to return the drive, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
68
IBM xSeries 100 Type 8486: Problem Determination and Service Guide