IBM xSeries 100, Руководство по диагностике и обслуживанию

Страница: 59 / 126

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 3, “Parts listing, xSeries 100 Type 8486,” on page 49 to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
405-xxx-00n Failed Ethernet test on the adapter in PCI
slot n .
v
For single-port computers n>0, (adapter
in PCI slot n )
v For dual-port computers n>1, (adapter in
PCI slot n )
1. Complete the following steps to identify the slot
on the riser card:
a. Run the Configuration/Setup Utility program.
b. Select Advanced Setup → PCI Slot/Device
Information .
In the information for the Ethernet controller, the
entry in the Slot column is the PCI slot number
for the adapter.
Note: If multiple adapters are installed, the failing
adapter is the one with a MAC address in the
Ethernet controller information that matches the
MAC address on the diagnostics screen where
the failure occurs.
2. Reseat the Ethernet adapter in slot n .
3. Replace the Ethernet adapter in slot n .
Chapter 2. Diagnostics
43