IBM WebSphere DataPower 7198, Инструкция по установке и эксплуатации

Страница: 75 / 88

7. Push the lever forward until you hear the release latch click in place.
8.
Move the locking control to the right to lock.
9. Turn on the appliance by pressing the power button located on the front of
the chassis.
10. Verify that the power LED is illuminated.
After replacing the module, you can verify that the new module is working:
v For the Type 7199, the amber LED on the hard disk drive module is not
illuminated.
v
The fault LED light on the front of the chassis is not illuminated.
After verifying that the replacement module is working, return the part to IBM.
For details, see “Returning an appliance or part” on page 42.
Chapter 7. Removing or replacing the appliance or parts
55