IBM WebSphere DataPower 7198, Инструкция по установке и эксплуатации

Страница: 26 / 88

Network connectors
The front panel has two LAN management Ethernet ports and two Ethernet
modules. See “Ethernet network configuration” on page 9 for a description of the
Ethernet numbering convention.
LAN management Ethernet ports: The
MGT0
and
MGT1
management Ethernet ports
provide connection to the LAN. These ports provide remote management access to
the appliance and should not be used as data ports. Use the interfaces in the
Ethernet modules for handling data traffic and for logging functions to and from
the DataPower services.
Best Practice: Use the
MGT0
or
MGT1
Ethernet interface for system-wide
management functions to handle network traffic for incoming
SNMP, SSH, and Web Management (WebGUI) functions on your
intranet.
MGT0
Ethernet connector
This Ethernet interface can manage all transaction data on the appliance.
The
MGT0
Ethernet connector also supports IPMI over LAN, including serial
over LAN.
MGT1 Ethernet connector
This Ethernet interface can manage all transaction data on the appliance.
Both
MGT0
and
MGT1
have an associated speed LED and activity LED.
Speed LED (A)
v The green LED indicates a 1 Gbps connection.
v
The amber LED indicates a 10 Mbps or 100 Mbps connection.
Activity LED (B)
v
The green LED indicates the port is linked.
v
The green blinking LED indicates the port is active.
Ethernet modules: The DataPower appliance has two Ethernet modules for
Ethernet connectivity. Use the interfaces in the Ethernet modules for handling data
traffic and for logging functions to and from the DataPower services.
Attention: You cannot hot-swap Ethernet modules. Hot swapping the modules
could cause the appliance to crash and possibly damage your appliance.
Left Ethernet module
On Type 7198, has four unshielded, twisted-pair (RJ45) Ethernet ports. The
Ethernet numbers range from
ETH10
to
ETH13
.
On Type 7199, has eight RJ45 Ethernet ports. The Ethernet numbers range
from
ETH10
to
ETH17
A B
Figure 4. Ethernet port LEDs
6
Installation and User's Guide