IBM VIAVOICE-SIMPLY DICTATION FOR MAC OS X, Руководство пользователя

Страница: 33 / 92

IBM ViaVoice Simply Dictation for Mac OS X User’s Guide 29
Welcome
Welcome Welcome
Welcome
Welcome
Welcome Welcome
Welcome
Tips for Using ViaVoice
• Speak at a normal pace, not too quickly, not too slowly. If you are
speaking ahead of what you see ViaVoice currently displaying, you
might be speaking too quickly.
• Make sure you wear your microphone headset correctly and in the
same way each time you use ViaVoice.
• At first, dictate a paragraph or two at a time and then correct
misrecognized words.
• If you are speaking in a location with a lot of unusual background noise, wait until the
noise subsides before dictating.
• If you plan to dictate in locations that differ greatly in background noise, you should
create a different Voice Model for each location. For example, you can create a Home
Voice Model and an Office Voice Model. Open the ViaVoice
UserSettings window to
create another Voice Model.
• Each time you dictate and make corrections, ViaVoice actually learns to recognize
your voice better. Get in the habit of correcting misrecognized words in your
dictation.
• Throughout this book the term “active” is used. It refers to the window that is
currently selected and has focus . It is important for you to give focus to the correct
window when you are dictating and using voice commands.
For example, the window below that is
active shows lit action buttons.
• Anytime you try to dictate or say a command in an area that ViaVoice does not
support, you hear a beep tone. Make sure your cursor is in the right location or select
an alternate location.