IBM Turbo 16/4 Token-Ring PC Card 2, Руководство пользователя

Страница: 78 / 123

OS/2 NDIS Error Codes
The following sections provide messages that can be received from the NDIS driver
function. The messages are logged to a file. The NDIS driver signals the user when
a Card Services call fails; the error signal is an alternating beep. If you hear this
sound, and you are running OS/2, a problem is occurring during configuration of the
PC Card and you must review the LANTRAN.LOG file in your \IBMCOM
subdirectory to determine what is wrong. Depending on the error, you may see one
or more of the following error codes.
Error Code Explanation and Action
LTG0022E A failure during initialization of te IBMTOKCS device
driver has occurred. This is a generic
Explanation:
This is a generic initialization failure message.
If the IBMTOKCS device driver encounters
any errors during initialization, the specific
message related to the error will accompany
this generic message.
User Action:
Resolve the specific error that accompanies
this message. In addition, ensure that the
Protocol Manager device driver,
PROTMAN.OS2, is located in the \IBMCOM
directory, and that a DEVICE statement for
PROTMAN.OS2 exists in the CONFIG.SYS
file.
LTG0023I An unrecognized parameter was found in
PROTOCOL.INI.
Explanation:
The parameter displayed was found while the
installation program wa sprocessing the IBM
Token-Ring Network Driver section of
PROTOCOL.INI. The parameter is not valid.
User Action:
Correct the parameter or remove it from
PROTOCOL.INI.
LTG024I A value specified for a parameter in PROTOCOL.INI is
not valid.
Explanation:
The value provided for the parameter is not
the correct type or is not a valid value.
User Action:
Change the value for the parameter in
PROTOCOL.INI.
62
Turbo 16/4 Token-Ring PC Card 2