IBM Turbo 16/4 Token-Ring PC Card 2, Руководство пользователя

Страница: 104 / 123

LANAIDC Parameters
The parameters LANAIDC uses to configure the PC Card are listed here. If no
options are given, LANAIDC.CFG will be used for input parameters. LANAIDC.CFG
is created by LANAID after a successful store has been performed.
/FILE=<drive:\path\filename> - specify a file with input
parameters
/CFGSYS=<drive> - specify the drive of the CONFIG.SYS
/MENUITEM=<keyword> - specify the menu item to install to in
CONFIG.SYS
/NOS - specify one of the following Network
Operating Systems
/NOS=NOVELL
/NOS=W4W
/NOS=LSPNDIS
/NOS=VINES
/NOS=LANTASTIC
/NOS=OTHERNDIS
/NOS=IBMLC
/NOS=LSPNATIVE
/NOS=MSLANMAN
/NOSDIR=<drive:\dir> - specify directory where Network Operating
System is installed
/MODE=ENHANCED - specify Enhanced Mode
/MODE=AUTO16 - specify Auto 16/4 Mode
/IO=<###> - specify Hex IO address
- Enhanced Mode values: 300 to EFC on a 4 byte boundary
- Auto16 Mode values: A20 or A24
/INT=<##> or /INT=AUTOSET - specify interrupt level
(3,4,5,7,9,10,11,14,15) or Autoset if Card Services is present
/MMIO=<#####> or /MMIO=AUTOSET- specify Hex MMIO address
- values: C0000-DE000 on an 8K boundary or Autoset if Card
Services is present
/SRAM=<#####> or /SRAM=AUTOSET- specify Hex SRAM address
(Auto16 Mode only)
- values: C0000-DC000 on a 16K boundary or Autoset if Card
Services is present
/RS=<##> - specify ring speed (4 or 16)
/AUTO=Y or /AUTO=N - enable/disable Auto Sense
/RSPROMPT=Y or /RSPROMPT=N - enable Ring Speed Prompt
/SOCKET=<x> - specify socket letter (Point Enabler only)
/VIEW - view the current configuration
/? - display abbreviated help
/H or /HELP - display extended help
88
Turbo 16/4 Token-Ring PC Card 2