IBM Turbo 16/4 Token-Ring PC Card 2, Руководство пользователя

Страница: 32 / 123

If you experience problems, go to “Appendix B. Problem Determination” on
page 49 .
For information concerning NetWare server error messages, see “Novell
NetWare Server Driver Messages” on page 50.
Server Driver Installation in Existing NetWare 4.11 Server
If Novell NetWare is in your computer, perform the following steps to install the
adapter server device driver.
Note: If you are altering the configuration of a previously-loaded adapter, unload
that adapter before proceeding with these instructions.
1. Create a diskette containing the extracted files from the NETWARE.EXE file on
the IBM Turbo 16/4 Token-Ring PC Card 2 CD-ROM.
2. Be sure that your IBM Turbo 16/4 Token-Ring PC Card 2 is already in your
computer. If it is not, follow the instructions in “Chapter 2. Installation” on
page 3.
3. Install the latest available Novell patches for NetWare 4.11. Make sure to
select the Version 3.31 ODI LAN Updates for Hardware if given the
opportunity. Return to the server console when the installation is complete.
4. Down and restart server from the server prompt to bring the server down,
then restart it again.
5. Check to see if the device driver is loaded. If it is, unload it using the following
command: unload token or unload ibmtoken
6. Type load install on the server.
7. Select Driver Options.
8. Select Configure Network Drivers.
9. Select Select Drivers.
10. On the next panel, press the Insert (INS) key to install the unlisted driver.
11. Insert the diskette that you created in step 1; press F3 on the next panel and
specify the path A:\NOVELL\NETWARE.
12. Follow the instructions on the panels to complete the installation of the driver.
If you need to make any custom configuration changes to the driver, do so at
this time.
13. Follow the instructions in the Novell manual to Create an AUTOEXEC.NCF file .
In addition to the instructions in the manual, add the following lines to the
AUTOEXEC.NCF file, immediately after the IPX INTERNAL NET statement. If
necessary, replace C:\NWSERVER with the actual location of the
SERVER.EXE executable.
LOAD C:\NWSERVER\NBI.NLM
LOAD C:\NWSERVER\MSM.NLM
LOAD C:\NWSERVER\TOKENTSM.NLM
LOAD C:\NWSERVER\IBMTOKEN.LAN NAME=IBMLS1 DATARATE=M16
Note: There will be existing LOAD and BIND IPX statements in the
AUTOEXEC.NCF. Delete the LOAD statement (we have replaced it with
the stated LOAD C:\NWSERVER\IBMTOKEN.LAN statement).
Also, make any needed modifications to the existing BIND IPX statement.
Refer to the
Bind the Protocol to the LAN Driver section of the Novell manual
for additional information.
16
Turbo 16/4 Token-Ring PC Card 2