IBM Turbo 16/4 Token-Ring PC Card 2, Руководство пользователя

Страница: 51 / 123

Change push button to select from the allowable values yourself. The Hardware
folder shows parameters of the computer system that you cannot set, but that
might be useful.
Select the Store push button.
When you finish with the panels, press the Done button and you will be
returned to the main panel. Installation is then complete. See “Appendix C.
Running the Diagnostics Program” on page 81 if you want to use the
diagnostics.
4. Reboot your computer.
Command Line Invocation of LANAID
Note to LAN administrators: If you want to do automated installations of LAN
Client, use the LANAIDC tool. Enter lanaidc /h from the directory on your hard
drive where you installed LANAID. You can also boot the Diagnostics and LANAIDC
diskette that you create from the DIAGDISK.EXE diskette image (see “Appendix A.
CD-ROM Content and Software Packages” on page 45). The diskette will boot to a
menu that allows you to select either Diagnostics or LANAIDC. See Appendix D.
LANAIDC Parameter Information for more information.
Bypassing Startup Files
If startup configuration files are bypassed, LANAID or LANAIDC does not have the
information to determine the resources used; therefore, it will not allow you to set
any parameters. Do not bypass the startup configuration if you want to configure
your system. (A typical way to bypass startup files is by pressing the F5 key during
the DOS boot phase.)
Chapter 5. LANAID
35