IBM TotalStorage FAStT600, Инструкция по установке и эксплуатации

Страница: 45 / 134

2. To remove a hot-swap fan, slide the latch on the fan to unlock it; then pull the
handle and remove the fan from the storage server.
Repeat this step for the other fan and set both fans aside for later installation.
3. To remove a power supply, grasp the pull-ring on the power supply lever and
squeeze to release it; then pull the lever fully open and remove the power
supply from the storage server.
Repeat this step for the other power supply; then set both power supplies aside
for later installation.
1
1
Figure 8. RAID controller removal
2
2
Figure 9. Hot-swap fan removal
Chapter 2. Installing and configuring the storage server
15