manualshive.com logo in svg

IBM ThinkPad 310E, Руководство пользователя

Поделиться
Скачать
IBM ThinkPad 310E Скачать руководство пользователя страница 67

Using the External Diskette Drive

Chapter 3.  Operating Your Computer          

3-21

Using the External Diskette Drive

IBM ThinkPad 310ED models come with a built-in CD-ROM drive
and an external diskette drive.

IBM ThinkPad 310E (those without a built-in CD-ROM drive) come
with the diskette drive already installed internally.

To install the external diskette drive, simply plug the diskette drive
cable into the diskette drive port, located on the rear panel of the
computer.  The ThinkPad automatically senses the presence of the
drive and configures itself accordingly.

Power to the diskette drive is provided through this connecting cable.
The diskette drive does not have its own internal power source.  It
draws its power from the ThinkPad.

Содержание ThinkPad 310E








































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды