manualshive.com logo in svg

IBM ThinkPad 310E, Руководство пользователя

Поделиться
Скачать
IBM ThinkPad 310E Скачать руководство пользователя страница 173

System Security

C-8

IBM ThinkPad 310E/310ED:  User’s Guide

Disabled

Disables the hard disk drive.

System Boot Drive

This parameter determines which drive the computer boots from
when you turn it on.  The following table lists the possible settings.

Setting

Description

Drive A
Then C
(default)

Computer boots from diskette drive A.  If there is no system
disk in drive A, the computer boots from hard disk C.  If the
hard disk is a non-system disk, an error message appears.

Drive A

Computer boots from diskette drive A.  If no diskette is
present or if the diskette in diskette drive A is a non-system
disk, an error message appears.

Drive C

Computer boots from hard disk C.  If hard disk C is not a
system disk, an error message appears.

Drive C
Then A

Computer boots from hard disk C.  If hard disk C is not a
system disk, the computer boots from diskette drive A.  If no
diskette is present or if the diskette in diskette drive A is a
non-system disk, an error message appears.

CD-ROM Bootable

When enabled, the computer checks the CD-ROM drive first and
boots from there, if possible, before checking the System Boot Drive
control setting.  The default setting is 

Disabled

.

There are two image types/formats for CD-ROMs -- diskette drive
and hard disk:

Image Type

Upon Boot-up...

Diskette Drive

CD-ROM drive becomes drive A and the diskette drive
becomes drive B.  The hard disk drive remains drive C.

Hard Disk

CD-ROM drive becomes drive C and the hard disk drive
becomes drive D.  The diskette drive remains drive A.

Содержание ThinkPad 310E








































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды