IBM SAN04B-R - System Storage Router, Инструкция по установке, обслуживанию и эксплуатации, Страница: 55 / 103

The configUpload command uploads the router configuration to the server so that
it is available for downloading to a replacement router, if necessary. For specific
instructions about how to back up and restore the configuration, see the Maintaining
Configurations chapter in the Fabric OS Administrator’s Guide . The switchShow ,
fabricShow , and configUpload commands are described in detail in the Fabric OS
Command Reference .
Viewing, adding, and removing license keys (optional)
Depending on what has been ordered, certain licenses are factory-installed on the
router. Feature licenses might be included as a paperpack item in the router
shipping carton. This paperpack will provide you with keys to unlock the features.
You can also purchase licenses separately from IBM.
Attention: Retain this paperpack in a safe place. The transaction keys in the
paperpack are required for activation of optional features on the router. Once
a feature is activated, its activation key is associated with a specific product
WWN and serial number.
To determine which licenses are currently enabled, enter the licenseShow
command. You need the WWN for the router to obtain and activate licenses; you
can get the WWN by using the switchShow command. Refer to the following
sections for information about viewing the current licenses, adding a license, or
removing a license. For more information on the following procedures, see the
Fabric OS Administrator’s Guide and the Fabric OS Command Reference .
Viewing current license keys
To view the licenses that are currently enabled on the router, complete the following
steps.
1. Log in as admin .
2. Enter the licenseShow command. A list of the enabled licenses and their
features is displayed, as in the following example.
Table 7. Viewing current licenses
APswitch:admin> licenseshow
License Key: bQebzeRdScRfc0iK
Web license
License Key: SybbzQQ9edTzcd0X
Zoning license
APswitch:admin>
Adding a license key
Licenses for additional functionality may be purchased as feature codes through
IBM. Contact your IBM representative for more information. You will need to supply
IBM with the WWN to obtain a transaction key, which is sent in a paperpack. To
obtain the license key, follow the instructions included in the paperpack. The
transaction key and the router wwn or product serial number are required to obtain
the license key.
To add a license to the router, complete the following steps.
1. Log in as
admin
.
2. Enter the switchShow command to obtain the WWN of your router.
Chapter 2. Installing and configuring the router
27