© Copyright IBM Corp. 2012
Chapter 2. Installing the RackSwitch G8264T
31
Using the Boot Management menu
The Boot Management menu allows you to switch the software image, reset the
switch to factory defaults, or to recover from a failed software download.
You can interrupt the boot process and enter the Boot Management menu from
the serial console port. When the system displays Memory Test, press <
Shift+B
>.
The Boot Management menu is displayed.
The Boot Management menu allows you to perform the following actions:
•
To change the booting image, press 1 and follow the screen prompts.
•
To change the configuration block, press 2, and follow the screen prompts.
•
To perform a software image recovery, press 3 and follow the screen prompts.
•
To perform an Xmodem download (boot image only), press 4 and follow the
screen prompts.
•
To exit the Boot Management menu, press 6. The booting process continues.
Resetting the System ...
Memory Test ................................
1 - Change booting image
2 - Change configuration block
3 - Boot in recovery mode (tftp and xmodem download of images to
recover switch)
4 - Xmodem download (for boot image only - use recovery mode for
application images)
5 - Reboot
6 - Exit
Please choose your menu option:
Содержание RackSwitch G8264T
