IBM RackSwitch G8264T, Руководство по установке

Страница: 31 / 64

© Copyright IBM Corp. 2012
17
Chapter 2. Installing the RackSwitch G8264T
This chapter describes how to install and initialize the RackSwitch G8264T.
Required tools
You need the following tools or equipment to install the RackSwitch G8264T:
•
Standard flat-blade screwdriver
• #2 Phillips screwdriver
• Electrostatic discharge wrist strap
Package contents
The basic RackSwitch G8264T package contains the following items:
•
G8264T switch unit (one of the following):
– G8264T (front-to-rear airflow)
– G8264T (rear-to-front airflow)
• Standard rack mount kit
– Two brackets
– Screws to attach brackets to the switch unit
– Screws to attach the switch unit to the equipment rack
• Mini-USB to RJ-45 serial cable, category 5 patch cable, RJ-45 to DB9 adapter
Environmental requirements
This section describes the basic environmental requirements for the RackSwitch
G8264T. Make sure the location where you install the switch meets the following
requirements:
•
Install the switch unit in a dry, clean, well-ventilated area.
• Provide adequate space in the front and back of the switch unit, to ensure proper
air flow.
• Make sure that an adequate grounded power supply is within reach of the switch
unit.
• Make sure that twisted-pair cable is routed away from power lines, fluorescent
lighting fixtures and other sources of electrical interference.
Preventing electric shock
This product does not contain any user-serviceable parts. Do not remove the cover
of this device.
The G8264T AC power model is designed to work with single-phase power systems
that have a grounded neutral conductor. To reduce the risk of electric shock, always
plug the power cord into a grounded power outlet.