IBM RackSwitch G8264T, Руководство по установке

Страница: 37 / 64

© Copyright IBM Corp. 2012 Chapter 2. Installing the RackSwitch G8264T
23
To mount the RackSwitch G8264T in an iDataPlex rack, complete the following
steps:
1. Use the M4 screws to attach front and rear mounting brackets to each side of
the switch unit. Torque the screws to approximately 1.3 newton-meters(10
inch-pounds).
2. M6 washers and screws are used to mount the switch unit into the rack. Torque
the screws to approximately 3.5 newton-meters (30 inch-pounds).
6
5
1
7
2
3
4