IBM Proventia Management SiteProtector SP1001, Руководство по конфигурации оборудования

Страница: 35 / 64

Chapter 3. Connecting and Configuring the SiteProtector
SP1001 Appliance
The first step is to connect the SiteProtector SP1001 appliance hardware to the
network so that you can begin managing the SiteProtector SP1001 appliance from
the SiteProtector Console. This chapter provides procedures for configuring the
SiteProtector SP1001 appliance to communicate with the network and for starting
the SiteProtector Console.
Note:
You can use the SiteProtector SP1001 Getting Started Card instead of the
procedures in this chapter if you are an experienced network administrator, and
you anticipate that your configuration will be straightforward. The
SiteProtector
SP1001 Getting Started Card provides minimal guidance.
Topics
“SiteProtector SP1001 Appliance Configuration Checklist” on page 12
“The SiteProtector SP1001 Appliance Front Panel” on page 13
“The SiteProtector SP1001 Appliance Back Panel” on page 14
“Connecting the SiteProtector SP1001 Appliance” on page 15
“Configuring the SiteProtector SP1001 Appliance to Communicate with the
Network” on page 15
“Installing and Starting the SiteProtector Console” on page 17
© Copyright IBM Corp. 1994, 2008
11