IBM Proventia Management SiteProtector SP1001, Руководство по конфигурации оборудования

Страница: 38 / 64

The SiteProtector SP1001 Appliance Back Panel
The SiteProtector SP1001 appliance back panel includes several different features
related to the power source, connections, and internal components.
SP1001 back panel
The following figure shows the SiteProtector SP1001 appliance back panel:
Back panel features
The following table describes the features of the back panel:
Feature Description
Power supplies The power supplies provides redundant
power for added reliability.
DVI port The DVI port lets you connect the
SiteProtector SP1001 appliance to a digital
monitor.
Power button The power button turns the SiteProtector
SP1001 appliance on and off.
VGA port The VGA port lets you connect the
SiteProtector SP1001 appliance to an analog
monitor.
Fan assemblies Fan assemblies maintain an appropriate
temperature for the SiteProtector SP1001
appliance.
Note: Use the DVI or VGA ports when you perform a procedure that requires a
monitor to be attached, such as restoring the SiteProtector SP1001 appliance to a
supported state on “Restoring Factory Defaults” on page 30.
Figure 2. SP1001 back panel
14
SiteProtector System: SP1001 Hardware Configuration