IBM PC 300GL Types 6275, Руководство пользователя

Страница: 89 / 176

To install an internal drive:
1. Place a medium flat–head screwdriver into the notch on the right side
of the bay panel covering the bay where you want to install the drive
and twist the screwdriver to pop the bay panel out of the bay.
2. Insert a flat–head screwdriver into one of the slots on the static shield
and pry the static shield loose from the drive bay.
3. Inside the computer are one or two picture frame panels for use when
you have installed a drive into one of the bays. The picture frame
panel for the 3.5-inch drive bay is attached to the outside of the chassis.
Chapter 7. Installing Options
75