IBM PC 300GL Types 6275, Руководство пользователя

Страница: 134 / 176

To start the IBM Enhanced Diagnostics program using the Product Recovery
CD, do the following:
1. Turn off your computer and any attached devices.
2. Turn on all attached devices; then turn on your computer.
3. When you see
Press F1 For Configuration/Setup
, press the F1 key.
4. When the Configuration/Setup Utility Program menu appears, select
Start Options .
5. Select Startup Sequence and press Enter.
6. Write down the device currently selected as the First Startup Device.
Then write down the devices selected as Second Startup Device, Third
Startup Device, and Fourth Startup Device. You must restore these
settings when you finish running diagnostics.
7. Select the First Startup Device. To start from the CD, select CD-ROM.
8. Press Esc two times to return to the Configuration/Setup Utility
Program menu.
9. Select Save Settings and follow the prompts.
10. Select Exit Setup and follow the prompts.
11. Place the Product Recovery CD in the CD-ROM drive.
12. Shut down and restart the computer. The Product Recovery CD will
load.
13. Select Diagnostics on the option menu and press Enter.
14. When you finish running the diagnostic program, press Esc, remove the
CD from the CD-ROM drive, and turn off the computer. You must
restore the First Startup Device back to the original setting. Follow
steps 2 through 9
To start the enhanced diagnostic program:
1. Shut down Windows 95 (or Windows NT) and turn off the computer.
2. Turn off any attached devices.
3. Insert the IBM Enhanced Diagnostic diskette into drive A.
4. Turn on all attached devices; then turn on your computer.
5. Follow the instructions that appear on the screen. For help, press F1.
120
PC 300GL User Guide