Using the Drive
This illustration shows the drive front panel:
.1/
Tape drive door
.2/
Unload button
.3/
Right indicator light
.4/
Left indicator light
Using the Indicator Lights
The indicator lights
.3/
.4/
are:
Left (green): This light indicates cartridge status. When this
light is on, the cartridge is inserted and ready for use. When this
light is flashing, it indicates that the tape drive needs cleaning or
that the cartridge needs to be replaced.
Right (amber): This light indicates drive status. When this light
is on, the tape drive is reading or writing to tape. When this light
is flashing, it indicates that a hardware fault has occurred. If this
happens, the tape drive might need to be replaced. Refer to the
warranty in Appendix E, or contact your IBM reseller.
The following table describes the indicator light combinations that
occur during tape operation.
2-8 12/24 GB DDS/3 4 mm Internal Tape Drive
All manuals and user guides at all-guides.com
