IBM Netfinity 7100, Руководство по установке

Страница: 19 / 60

Chapter 2. Installing options
9
The following illustration shows the installation of a hot-plug adapter.
Attention: When you handle Electrostatic Discharge-Sensitive devices (ESD), take
precautions to avoid damage from static electricity. For details on handling these
devices, refer to the following Web site and use a search term of ESD:
http://www.ibm.com/
To install an adapter.
1. Review the information in “Safety” on page v.
2. If you are installing a non-hot-plug adapter, turn off the server and disconnect all
cables.
3. Remove the top cover.
4. Select a slot, open the tab and the expansion-slot cover, and remove the
expansion-slot cover.
5. Install the adapter in the slot; then, close the tab and adapter retention latch.
6. Install the top cover.
7. If you installed a non-hot-plug adapter, connect all cables and power cords.
Adapter retention latch Tab
Adapter
retention latch
Adapter