IBM Multiprise 3000 S/390, Руководство по установке

Страница: 165 / 175

|
7 Shutdown the Hardware
|
Management Console(s)
|
1. Minimize all windows
|
displayed by clicking on their
|
minimize icons (in the upper
|
right corner of the windows).
|
2. Click once with the right
|
mouse button on the
|
Desktop.
|
3. Select Shut down from the
|
system menu.
|
4. Select OK on any
|
confirmation window
|
displayed.
|
5. When a message indicates
|
that shutdown is complete,
|
power off the console display
|
and system unit.
|
6. Repeat this procedure for
|
each of your consoles.
| DANGER
| An electrical outlet that is not correctly wired could place hazardous voltage on metal parts
| of the system or the products that attach to the system.
| 1. When installing the system, do not plug in any power cord until instructed to do so. All
| signal cables must be connected first.
| 2. If the power cord to the I/O device cannot be disconnected, use one hand to connect
| the signal cables.
| During an electrical storm, do not handle cables, connectors, or station protectors for
| communications, work stations, printers, or telephones.
| DANGER
| To prevent a possible shock during an electrical storm, do not connect or disconnect
| cables or station protectors for communications lines, display stations, printers, or
| telephones.
| DANGER
| To prevent a possible shock from touching two surfaces with different electrical grounds,
| use one hand, when possible, to connect or disconnect signal cables.
Appendix A. Discontinuing
A-5