IBM LS21 - BladeCenter - 7971, Инструкция по установке и эксплуатации

Страница: 15 / 84

The double-width type LS41 Type 7972 blade server is shown in the following
illustration.
Release
handles
A set of blank labels comes with the blade server. When you install the blade server
in the BladeCenter unit, write identifying information on a label and place the label
on the BladeCenter unit bezel. See the documentation for your BladeCenter unit for
recommended label placement.
Important: Do not place the label on the blade server itself or in any way block the
ventilation holes on the blade server.
Related documentation
This Installation and User’s Guide contains general information about the blade
server, including how to install supported options and how to configure the blade
server. The following documentation also comes with the blade server:
v Problem Determination and Service Guide
This document is in Portable Document Format (PDF) on the IBM Documentation
CD. It contains information to help you solve problems yourself, and it contains
information for service technicians.
v
Safety Information
This document is in PDF on the IBM Documentation CD. It contains translated
caution and danger statements. Each caution and danger statement that appears
in the documentation has a number that you can use to locate the corresponding
statement in your language in the Safety Information document.
v
Warranty and Support Information
This document is in PDF on the IBM Documentation CD. It contains information
about the terms of the warranty and getting service and assistance.
Depending on your BladeCenter product, additional documents might be included
on the IBM Documentation CD.
Chapter 1. Introduction
3