IBM IntelliStation Z Pro 6223, Руководство пользователя

Страница: 33 / 134

Note: The Wake on LAN feature functions only if the computer was properly
shut down and turned off.
v Remote Administration
A network administrator can use the Remote Administration feature to remotely
update the POST and BIOS code in your computer. Network-management
software, such as Remote Deployment Manager, is required to take advantage of
this feature.
v
Remote Deployment Manager
Remote Deployment Manager is a graphical, server-based program that performs
mass unattended installations of operating systems, software, device drivers, and
BIOS code updates to remote systems. Used with the Wake on LAN feature,
Remote Deployment Manager can remotely turn on your computer so that
installations can be done while the computer is not being used.
v
Software Migration Assistant
A network administrator can use Software Migration Assistant (SMA) to remotely
transfer configurations, profile settings, printer device drivers, and files from an
IBM or non-IBM computer to supported IBM systems.
Shutting down the operating system
Note: When you connect the power cord to the computer and an ac power source,
the power-supply fan will run and continue to run when the computer is in standby
mode to provide cooling to the power supply.
When you are ready to turn off the computer, use the shutdown procedure for your
operating system to save data and prevent damage to your applications. See your
operating-system documentation for more information.
If you are using the preinstalled Microsoft Windows XP operating system, complete
the following steps to shut down the operating system and computer:
1. Save and close all files that you are working with.
2. Close all open applications.
3. Click Start .
4. Click Turn Off Computer ; then, click Turn Off to confirm.
If you are using the preinstalled Red Hat Linux operating system, complete the
following steps to shut down the operating system and computer:
1. Save and close all files with which you are working.
2. Close all open applications.
3. Click Red Hat Linux Main Menu Button
→
Logout
→
Shutdown .
4. Click OK to confirm.
Turning off the computer
When you turn off the computer and leave it connected to ac power, the computer
can respond to requests, such as a remote request to turn on the computer. To
remove all power from the computer, you must disconnect it from the power source.
Some operating systems require an orderly shutdown before you turn off the
computer. See your operating-system documentation for information about shutting
down the operating system.
Chapter 2. Operating the computer
19