IBM IntelliStation Z Pro 6223, Руководство пользователя

Страница: 92 / 134

Table 5. POST error messages (continued)
POST message Description
1602 An error occurred during the system management adapter test.
Action: Check the signal and power cable connections to the system management adapter. If
the problem remains, call for service.
1762 A hard disk configuration error occurred.
Action: Complete the following steps to correct the problem:
1. Make sure that the hard disk drive is set correctly in the Configuration/Setup Utility
program.
2. Make sure that the hard disk drive cables are correctly and securely connected.
3. If the problem remains, replace the hard disk drive.
If the problem remains, call for service.
178x A hard disk failure occurred.
Action: Make sure that the hard disk drive cables are correctly and securely connected. If the
problem remains, call for service.
1801 A PCI adapter has requested memory resources that are not available.
Action: The the following steps to correct the problem.
1. Make sure that the PCI adapter and all other adapters are set correctly in the
Configuration/Setup Utility program. If the memory resource settings are not correct,
change the settings.
2. If all memory resources are being used, you might need to remove an adapter to make
memory available to the PCI adapter. Disabling the adapter BIOS on the adapter might
correct the error. See the documentation provided with the adapter.
1802 A PCI adapter has requested an I/O address that is not available, or the PCI adapter might be
defective.
Action: Take the following steps to correct the problem:
1. Make sure that the I/O address for the PCI adapter and all other adapters are set correctly
in the Configuration/Setup Utility program.
2. If the I\O port resource settings are correct, the PCI adapter might be defective. Call for
service.
1803 A PCI adapter has requested a memory address that is not available, or the PCI adapter might
be defective.
Action: Take the following steps to correct the problem:
1. Make sure that the memory address for all the other adapters are set correctly in the
Configuration/Setup Utility program. If the memory resource settings are not correct,
change the settings.
2. If the memory resource settings are correct, the PCI adapter might be defective. Call for
service.
1804 A PCI adapter has requested a memory address that is not available.
Action: If all memory addresses are being used, you might need to remove an adapter to
make memory address space available to the PCI adapter. Disabling the adapter BIOS on the
adapter might correct the error. See the documentation provided with the adapter.
1805 A PCI adapter ROM error occurred.
Action: Remove the PCI adapters. If you can start the computer without the adapters, reinstall
each adapter one at a time and retest after each is reinstalled. When an adapter fails, replace
it.
if you cannot isolate and correct the problem, call for service.
78
IntelliStation Z Pro Type 6223: User’s Guide