IBM IntelliStation M Pro 9229, Руководство по установке

Страница: 47 / 72

Table 2. POST error messages (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See the part listing in the Problem Determination and Service Guide to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error codes Description Action
000197xx The microprocessor has failed the built-in
self-test (BIST).
Note: xx is a number from 00 to 07.
1. (Trained service technician only) Reseat
the microprocessor.
2. Replace the following components one at
a time, in the order shown, restarting the
computer each time:
a. (Trained service technician only)
Microprocessor
b. (Trained service technician only)
System board
012980xx No update data for microprocessor.
Note: xx is 00 to 07.
1. Make sure that the microprocessor has
the correct cache size.
2. Update the BIOS code. For information
about updating the BIOS code, see the
Problem Determination and Service
Guide on the IBM IntelliStation
Documentation CD.
3. Replace the following components one at
a time, in the order shown, restarting the
computer each time:
a. (Trained service technician only)
Microprocessor
b. (Trained service technician only)
System board
012981xx Bad update data for microprocessor.
Note: xx is 00 to 07.
1. Make sure that the microprocessor has
the correct cache size.
2. Update the BIOS code. For information
about updating the BIOS code, see the
Problem Determination and Service
Guide on the IBM IntelliStation
Documentation CD.
3. Replace the following components one at
a time, in the order shown, restarting the
computer each time:
a. (Trained service technician only)
Microprocessor
b. (Trained service technician only)
System board
Chapter 5. Solving problems
35