IBM IntelliStation M Pro 9229, Руководство по установке

Страница: 28 / 72

The following sections provide utility program instructions for starting the
Configuration Utility programs.
Starting the Configuration/Setup Utility program
The Configuration/Setup Utility program is a menu-driven utility that is part of the
BIOS. Use it to:
v
Configure serial port assignments
v Change the startup sequence
v
Enable USB keyboard and mouse support
v Resolve configuration conflicts
v
Set the date and time
v Set passwords
To start the Configuration/Setup Utility program, complete the following steps:
1. Turn on the computer and watch the monitor screen. If the computer is already
on when you start this procedure, you must shut down the operating system,
turn off the computer, wait a few seconds until all in-use LEDs are turned off,
and restart the computer.
2. When the message
Press F1 for Configuration/Setup, Press F12 for Boot
Menu
is displayed, press F1. (This prompt is displayed on the screen for only a
few seconds. You must press F1 quickly.) If you have set both a power-on
password and an administrator password, you must type the administrator
password to access the full Configuration/Setup Utility menu. If you do not type
the administrator password, a limited Configuration/Setup Utility menu is
available.
3. Follow the instructions on the screen.
Using the Boot Menu program
The Boot Menu program is a built-in, menu-driven configuration program that you
can use to temporarily redefine the first startup device without changing settings in
the Configuration/Setup Utility program.
To use the Boot Menu program complete the following steps:
1. Turn off the computer.
2. Restart the computer.
3. Press F12.
4. Select the startup device.
The next time the computer is started, it returns to the startup sequence that is set
in the Configuration/Setup Utility program.
Enabling the Broadcom NetXtreme Gigabit Ethernet Boot Agent
The Broadcom NetXtreme Gigabit Ethernet Boot Agent is part of the BIOS. You can
use it to configure the network as a startable device, and you can customize where
the network startup option occurs in the startup sequence. Enable and disable the
Broadcom NetXtreme Gigabit Ethernet Boot Agent from the Configuration/Setup
Utility program.
To enable the Broadcom NetXtreme Gigabit Ethernet boot agent, complete the
following steps:
16
IBM IntelliStation M Pro Type 9229: Installation Guide