IBM IntelliStation M Pro 9229, Руководство по установке

Страница: 37 / 72

Table 2. POST error messages (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See the part listing in the Problem Determination and Service Guide to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error codes Description Action
101 Timer tick interrupt failure. (Trained service technician only) Replace the
system board.
102 Timer tick 2 test failure. (Trained service technician only) Replace the
system board.
151 A real-time clock (RTC) error occurred.
1. Run the diagnostics program.
2. Reseat the battery.
3. Replace the following components one at
a time, in the order shown, restarting the
computer each time:
a. Battery
b. (Trained service technician only)
System board
161 The real-time clock battery has failed.
1. Run the Configuration/Setup Utility
program, select Load Default Settings ,
make sure that the date and time are
correct, and save the settings.
2. Reseat the battery.
3. Replace the following components one at
a time, in the order shown, restarting the
computer each time:
a. Battery
b. (Trained service technician only)
System board
Chapter 5. Solving problems
25