IBM IntelliStation A Pro 6224, Руководство по техническому обслуживанию и ремонту, Страница: 40 / 172

Replacing the bezel
When working with some devices, such as additional optical drives, you must first
remove the bezel to access the device.
Complete the following steps to remove the bezel:
1. Unlock the side-cover lock.
2. Remove the side cover (see “Replacing the side cover” on page 27).
3. Locate the bezel-release lever; then, press the bezel-release lever toward the
front of the computer.
1394
4. Pull the top of the bezel away from the chassis; then, push the bezel down to
disengage the bottom tabs.
5. Remove the bezel from the computer and store the bezel in a safe place.
To install the bezel, complete the following steps:
1. Insert the two tabs on the bottom of the bezel into the matching holes on the
computer chassis.
2. Push the top of the bezel toward the computer until the two tabs at the top of
the bezel snap into place.
30
IntelliStation A Pro Type 6224: Hardware Maintenance Manual and Troubleshooting Guide