IBM IntelliStation A Pro 6224, Руководство по техническому обслуживанию и ремонту

Страница: 47 / 172

10. Touch the static-protective package containing the drive to any unpainted metal
surface on the computer; then, remove the drive from the package and place it
on a static-protective surface.
11. Follow the instructions that come with the drive to set jumpers or switches, if
any.
Note: You might find it easier to install the new drive into the opening on the
front and then attach the cables.
12. If you are installing a 3.5-in. drive in bay 2, attach a 5.25-in. conversion kit to
the 3.5-in. drive.
13. Remove the clip from the side of the drive cage of bays 1 and 2 by sliding the
clip to the left; then, snap the clip into the screw holes on the side of the drive
or conversion kit (with the blue side of the clip facing outward) (see Figure 13
on page 38).
Note: If you are replacing an existing drive, remove the drive clips from the
drive you have removed and install them on the new drive.
EMC shield
Filler panel
Figure 12. Preparing to install a drive in bay 2
Chapter 4. Customer replaceable units
37