IBM IntelliStation A Pro 6224, Руководство по техническому обслуживанию и ремонту

Страница: 24 / 172

Creating an Enhanced Diagnostics diskette
You can create an IBM Enhanced Diagnostics diskette from the Product Recovery
program or from the World Wide Web.
Notes:
1. To create and use a diskette, you must add a diskette drive to the computer.
2. When using diagnostics with a USB keyboard and mouse attached, you must
first enable USB emulation. Restart the computer and press F1 to start the
Configuration/Setup Utility. Select Devices and I/O Ports , then select USB
Setup and make sure that the USB keyboard and mouse are enabled.
Complete the following steps to create an IBM Enhanced Diagnostics diskette from
the Product Recovery program partition:
1. Restart the computer and watch the monitor.
2. When the message To start the Product Recovery Program, Press F11
appears, quickly Press F11.
3. Select System utilities .
4. Select Create IBM Enhanced Diagnostics Diskette .
5. Follow the instructions on the screen.
Complete the following steps to download the latest image of the IBM Enhanced
Diagnostics and create a startable Enhanced Diagnostics diskette:
1. Go to http://www.ibm.com/pc/support.
2. Download the diagnostics file for the computer to a hard disk directory (not to a
diskette).
3. Go to a DOS prompt, and change to the directory where the file was
downloaded.
4. If you are creating a diagnostics diskette, complete the following steps:
a. Insert a blank high-density diskette into the diskette drive.
b. Type filename a: (where filename is the name of the file you downloaded
from the Web), and press Enter.
The downloaded file is self-extracting when copied to the diskette. When the
copy is completed, you have a startable or bootable IBM Enhanced Diagnostics
diskette.
Using the Enhanced Diagnostics diskette
If a diskette drive has been installed in the computer and an Enhanced Diagnostics
diskette has been created (see “Creating an Enhanced Diagnostics diskette”),
complete the following steps to start the IBM Enhanced Diagnostics using the
diagnostics diskette:
1. Turn off the computer and any peripheral devices.
2. Insert the IBM Enhanced Diagnostics diskette into the diskette drive.
3. Turn on all attached devices; then, turn on the computer.
4. Follow the instructions on the screen.
5. When the tests are completed, view the test log by selecting Utility from the top
of the screen. You can save the test log to a file on a diskette or to the hard
disk.
14
IntelliStation A Pro Type 6224: Hardware Maintenance Manual and Troubleshooting Guide