IBM Infoprint 6500-v05, Руководство по обслуживанию

Страница: 40 / 544

Chapter 1
Start Of Call
40
Start Of Call
Are you here because of an
error message?
YES
NO
Go to Troubleshooting Display
Messages , page 42.
NO
Did the fans come on after 10
seconds?
YES
After about 10
seconds did the
fans come on ?
YES
YES
NO
IML was
successful.
Other
symptoms are
listed in Table
5, page 176.
Go to Printer does not
complete IML , page 185.
Did ANY of steps 1 thru 3
occur?
NO
Press STOP .
Press CONFIG .
Press START .
Does machine
configuration print?
YES
NO
Go to the Operator Panel
section of Table 5, page
176
The Operator Panel is
not functioning (Table
5 page 176)
—OR—
Printer does not
complete IML
, page
185.
Go to No power, and
operator panel is blank,
and card cage fan is not
running
, page 184.
YES
NO
Are there black
squares on the
operator panel?
NO
Go to Printer does not
complete IML , page 185.
YES
Go to Black
squares on
operator panel
display
, page
180.
Power on the printer and
observe the operator panel for
the following sequence of
events (retry as required):
1. All black squares appear on
the display.
2. Display goes blank.
3. The following messages
appear on the display, in this
order:
B00 STATUS: SDRAM
DETECTION 33MHZ
B01 STATUS: 8245
SDRAM TEST 32MB
B51 STATUS: XX%
LOADING
B30: STATUS INITIALIZING...
Did steps 1, 2, and 3 occur?
Did the status
lamp come on
and READY
appear on the
display? (If
default is NOT
READY, status
lamp will not
come on.)
YES
NO