manualshive.com logo in svg

IBM Infoprint 1130, Руководство по обслуживанию, Страница: 55 / 433

Поделиться
Скачать
IBM Infoprint 1130 Скачать руководство пользователя страница 55

2-28

Service Manual

IBM Infoprint 1130/1140

Resetting Printer

The printer is deleting 
any print jobs in process 
and restoring all settings 
to user defaults.

No button actions are 
possible while this 
message is displayed.

Formatting Flash 
(Do Not Power Off)

The flash memory is 
being formatted.

No button actions are 
possible while this 
message is displayed.

Program Flash 
(Do Not Power Off)

The flash memory is 
being programmed, 
which means fonts or 
macros are being written 
to flash memory.

Do not perform any 
button actions while 
this message is 
displayed.

Formatting Disk

The disk is being 
formatted.

No button actions are 
possible while this 
message is displayed.

 Programming Disk 
(Do Not Power Off)

The disk is being 
programmed, which 
means fonts or macros 
are being written to disk.

No button actions are 
possible while this 
message is displayed. 

Note: If information is 
written to flash 
memory and to disk at 
the same time, the 
Program Flash 
message is displayed.

Menus Disabled

The printer menus have 
been disabled. This 
occurs when Menu> or 
<Menu is pressed while 
the printer is Ready and 
Menu Lockout is active. 
The printer display 
shows this message for 
one second and then 
returns to the Ready 
message.

No button actions are 
possible while this 
message is displayed.

Activating Menu 
Changes

The printer is reset to 
activate a printer setting 
changed in the menus.

No button actions are 
possible while this 
message is displayed.

User Status Screens

Status

Action

Содержание Infoprint 1130


















































































































































































































































































































































































































































Отзывы:

Нет отзывов