IBM eServer xSeries 235 Type 8671, Техническое обслуживание и устранение неисправностей

Страница: 103 / 214

1. Review the information in “Installation guidelines” on page 41, “Handling
static-sensitive devices” on page 42, and “Safety information” on page 163.
2. Pull out on the orange fan-release latch on the rear fan bracket; then, lift the fan
up and out of the hinge cutouts.
3. Touch an unpainted metal part of the server for at least 2 seconds; then, slide
the replacement fan into the server. (Make sure that the fan fits correctly into
the hinge cutouts on the rear of the server.)
4. When you have the fan properly seated, push on the fan-release latch until it
clicks into place.
5. Verify that the FAN LED on the diagnostic LED panel (see “Light Path
Diagnostics” on page 34) is not lit. If the FAN LED is lit, reseat the fan.
Replacing the battery
IBM has designed this product with your safety in mind. The lithium battery must be
handled correctly to avoid possible danger. If you replace the battery, you must
adhere to the following instructions.
Note: In the U. S., call 1-800-IBM-4333 for information about battery disposal.
If you replace the original lithium battery with a heavy-metal battery or a battery with
heavy-metal components, be aware of the following environmental consideration.
Batteries and accumulators that contain heavy metals must not be disposed of with
normal domestic waste. They will be taken back free of charge by the manufacturer,
distributor, or representative, to be recycled or disposed of in a proper manner.
To order replacement batteries, call 1-800-772-2227 within the United States, and
1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and Canada,
call your IBM reseller or IBM marketing representative.
Note: After you replace the battery, you must reconfigure your server and reset the
system date and time.
Statement 2:
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has
a module containing a lithium battery, replace it only with the same module
type made by the same manufacturer. The battery contains lithium and can
explode if not properly used, handled, or disposed of.
Do not:
v Throw or immerse into water.
v Heat to more than 100°C (212°F)
v Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
Chapter 4. Customer replaceable units
93