IBM eServer xSeries 226Type 8648, Руководство по установке опций

Страница: 23 / 76

Removing the bezel
When working with some devices, such as additional optical drives, you must first
remove the bezel to access the device.
Complete the following steps to remove the bezel:
1. Unlock the side-cover lock.
2. Remove the side cover (see “Removing the side cover” on page 10).
3. For hot-swap hard disk drive models, slide the lock bar to the left.
4. Locate the bezel-release lever; then, press the bezel-release lever toward the
front of the server.
5. Pull the top of the bezel away from the chassis; then, push the bezel down to
disengage the bottom tabs.
6. Remove the bezel from the server and store the bezel in a safe place.
For instructions for replacing the bezel, see “Replacing the bezel” on page 41.
Chapter 2. Installing options
11