IBM Eserver pSeries 670, Руководство пользователя

Страница: 50 / 198

The four inner memory books, if present, are listed first, if present. The memory
books are shown in the following order of physical location code:
1 U1.18-P1-M2
2 U1.18-P1-M3
3 U1.18-P1-M7
4 U1.18-P1-M6
v
Power Control Network Utilities Menu
POWER CONTROL NETWORK UTILITIES MENU
1. Lamp Test for all Operator Panels
2. Display I/O Type
Not Supported
3. Change I/O Type
98. Return to Previous Menu
0>
– Lamp Test for All Operator Panels
Selecting this option tests the media drawer operator panel’s indicators by causing
them to blink on and off for approximately 30 seconds.
– Change I/O Type
Use this option to change the I/O type of the primary I/O book after a service
action or configuration change if the I/O type is incorrect. If this option is chosen,
you will be asked to make the following entries:
1. For the I/O drawer address, type
1
.
2. For the I/O type, type
98
.
If either value is not valid, a failure message displays on the console. Press Enter
to return to the Power Control Network Utilities Menu.
v
LED Indicator Menu
This menu displays the state of the processor subsystem disturbance/system
attention LED and the fault/identify LED on the I/O subsystem(s). Use this menu to
toggle the attention/fault LEDs between identify (blinking) and off. An example of this
menu follows:
34 Eserver
pSeries 670 User’s Guide