IBM Eserver pSeries 670, Руководство пользователя

Страница: 106 / 198

2. Customer Administrative Center
3. Pager
If Call Out Policy is set to all, call out attempts to call all of the following numbers in
the order listed:
1. Service Center
2. Customer Administrative Center
3. Pager
v
Customer RETAIN Login ID Customer RETAIN Login Password
These settings apply to the RETAIN service function.
v
Remote Timeout, in seconds Remote Latency, in seconds
These settings are functions of the service provider’s catcher computer.
v
Number of Retries While Busy
This is the number of times the system retries busy calls.
v
System Name (System Administrator Aid)
This is the name given to the system and is used when reporting problem messages.
Note: Knowing the system name aids the support team in quickly identifying the
location, configuration, history, and so on of your system.
You can access this service aid directly from the AIX command line, by typing:
/usr/lpp/diagnostics/bin/uspchrp -m
Configure Ring Indicate Power-On Policy
This service aid allows the user to power-on a system by telephone from a remote
location. If the system is powered off, and Ring Indicate Power On is enabled, the
system powers on at a predetermined number of rings. If the system is already on, no
action is taken. In either case, the telephone call is not answered, and the caller
receives no feedback that the system has powered on.
Use this service aid to display and change the following settings for the Ring Indicate
Power-On Policy:
Note: Because of system capability, some of the following settings might not be
displayed by this service aid.
v
Power On Via Ring Indicate (on/off)
v
Number of Rings Before Power On
You can access this service aid directly from the AIX command line, by typing:
/usr/lpp/diagnostics/bin/uspchrp -r
90 Eserver
pSeries 670 User’s Guide