IBM Eserver pSeries 670, Руководство пользователя

Страница: 75 / 198

Chapter 4. Using System Management Services
Use the system management services menus to view information about your system or
partition, and to perform tasks such as setting a password, changing the boot list, and
setting the network parameters.
Note: On some of the system management services (or service processor) screens,
you will see the term
LPAR, which is equivalent to the term logically partitioned
system or simply partitioned system.
Note: In a partitioned system, only those devices that are assigned to the partition that
is being booted display in the SMS menus. In a full system partition, all devices
in the system display in the SMS menus.
To start the system management services, do the following:
1. For a partitioned system, use the Hardware Management Console for pSeries
(HMC) to restart the partition.
For a full system partition, restart the system.
2. For a partitioned system, watch the virtual terminal window on the HMC.
For a full system partition, watch the firmware console.
3. Look for the POST indicators memory, keyboard, network, scsi, speaker, which
appear across the bottom of the screen.
Press the numeric 1 key after the word keyboard appears, and before the word
speaker appears.
For more information on the POST indicator words, refer to “Understanding the
Power-On Self-Test (POST)” on page 10.
After the system management services starts, the following screen displays:
Utilities
1 Password Utilities...NOT available in LPAR mode.
2 Display Error Log
3 Remote Initial Program Load Setup
4 SCSI Utilities
5 Select Console...NOT available in LPAR mode.
6 MultiBoot
7 Select Language
8 OK Prompt
.------.
|X=Exit|
`------’
===>
Each option on the system management services utilities menu is described in this
section.
59