IBM eServer BladeCenter 8677, Инструкция по установке и эксплуатации

Страница: 86 / 108

correctly configured. It might be necessary to manually gather information about the
relevant software levels or run IBM-approved utility programs to gather this
information. It might be necessary to isolate the failing system from any active
production environment to gather this information. You are responsible, with
assistance from the service specialist, for gathering this information. The IBM
Statement of Limited Warranty does not include on-site assistance with this activity.
Warranty service and support
With the original purchase of an IBM
Eserver
or IntelliStation system, you have
access to extensive service and support. During the IBM Machine warranty period,
you may call IBM or your reseller for problem-determination assistance under the
terms of the IBM Statement of Limited Warranty.
The following services are available during the warranty period:
v Problem determination - Trained personnel are available to assist you with
determining if you have a hardware problem and deciding what action is
necessary to fix the problem.
v
IBM hardware repair - If the problem is determined to be caused by IBM
hardware under warranty, trained service personnel are available to provide the
applicable level of service, either on-site or at an IBM service center as
determined by IBM.
v Engineering Change management - Occasionally, there might be changes that
are required after a product has been shipped from IBM. In those instances, IBM
will make Engineering Changes (ECs) available that apply to your hardware.
v Customer replaceable units (CRUs) - Some parts of IBM
Eserver
BladeCenter, xSeries and IntelliStation systems are designated as customer
replaceable units. IBM ships CRUs to you for replacement by you. CRUs include
keyboards, monitors, memory, diskette drives, hard disk drives, and mice (this list
is not inclusive of all CRUs).
The following items are not covered under warranty service:
v
Replacement or use of non-IBM parts. All IBM parts contain a 7-character
identification in the format IBM FRU XXXXXXX.
v Identification of software problem sources.
v Installation of customer replaceable units (CRUs).
v Installation and configuration of BIOS code, firmware, or device drivers that are
designated as customer installable.
See the IBM Statement of Limited Warranty for a full explanation of IBM warranty
terms. Be sure to retain your proof of purchase to obtain warranty service.
Please have the following information ready when you call:
v The machine type and model of your IBM hardware product (if available)
v
Serial numbers of your IBM hardware products
v A description of the problem
v
The exact wording of any error messages
v Hardware and software configuration information
International Warranty Service
If you travel with your
Eserver
or IntelliStation system or relocate it to a country or
region where your system is sold and serviced by IBM or IBM resellers authorized
70
BladeCenter Type 8677: Installation and User’s Guide