IBM eServer 380 xSeries, Руководство по установке

Страница: 29 / 54

Chapter 3. Server power, controls, and indicators
15
• Remove items from your shirt pocket (such as pens or pencils) that could fall into
the server as you lean over it.
• Take care to avoid dropping any metallic objects, such as paper clips, hair pins, or
screws, into the server.
Controls and indicators
The following section identifies the controls and indicators on the front of your server.
Note: The illustrations in this document might differ slightly from your hardware.
Power control button: Press this button to turn the server on or off.
Reset button: Press this button to reset the server and run the power-on self-test
(POST).
Initialization button: Press this button to move register information into a file or
output device, provided the operating system supports copying or moving of the
register information.
System power light: When this light is on, power is present in the server. When this
light is off, it indicates that power is turned off or the power source is disrupted.
Power failure light: When this light is flashing, it indicates that the power source
failed. When this light is on, it indicates a catastrophic power failure.
Fan failure light: When this light is flashing, it indicates that a fan has failed.
Hot-plug adapter failure light: When this light is on, it indicates that a hot-plug
adapter has failed.
Operator information panel: System monitor information appears on this display.
PWR ACTIVE FAIL PWR ACTIVE ACTIVE FAIL
POWER RESET INIT
SYS PWR FAN GEN-
754499-
LCD DISPLAY
Power control button
Reset button
Initialization button
System power light
Power failure light
Fan failure light
Hot-plug adapter failure light
Operator
information panel
Hard disk drive
failure light
Hard disk drive
activity light
Hard disk drive
power-on light