IBM E16RMLL-I - Tivoli Storage Manager, Руководство по внедрению

Страница: 609 / 828

Chapter 17. Server-free data movement
579
13.Define paths from the datamover to the tape drives:
define path sandg1 drivea srct=datamover destt=drive libr=3583_svt
Define paths for all of the drives in the same way.
13.Define paths from the datamover to the disks:
define path sandg1 Harddisk4 srct=datamover destt=disk node=bordeaux
17.4.5 Configuring the Tivoli Storage Manager Client
Follow these steps to configure the Tivoli Storage Manager client for server-free
data movement:
1. Install the Logical Volume Snapshot Agent (LVSA) so that you can perform
online image backup. We showed how to do this in 4.5.6, “Open File Support
configuration” on page 167.
2. Make sure that you can see the SAN disk from the client device manager.
3. Make sure that the node name is the same as defined for the disks on the
Tivoli Storage Manager server.
4. Make sure that the server-free client node is assigned to the correct policy
domain. The policy domain must back up directly to the tape.
5. Edit dsm.opt to add line
enableserverfree=yes
. You can also specify other
parameters for server-free data movement like snapshotcachelocation and
snapshotcachesize.
6. The last step is to specify a backup command like this:
dsmc backup image <drive name for the san attached disk> <options>
Options can be found in the Tivoli Storage Manager client help. Examples
are:
– dsmc backup image D:
– dsmc restore image D: E: -noprompt
17.5 Running server-free backup and restore
The screen captures in this section show how the server-free backup works once
it is set up.