IBM E16RMLL-I - Tivoli Storage Manager, Руководство по внедрению

Страница: 437 / 828

Chapter 13. Routine tasks
407
To enable a specific receiver (such as CONSOLE, ACTLOG, EVENTSERVER,
FILE, FILETEXT, SNMP, TIVOLI, USEREXIT) use the
enable events command,
as shown in Example 13-11.
Example 13-11 Enable events command
tsm: ATLANTIC>
enable events actlog all nodename=*
ANR1844I ENABLE EVENTS command processed
13.4 Health monitoring
After the Integration Solutions Console (ISC) and Administration Center are
installed, Tivoli Storage Manager servers should be added to the portal, Only
Tivoli Storage Manager V5.3 and later releases can be added.
Health Monitoring uses the Tivoli Storage Manager Server Administrator account
ADMIN_CENTER. This account is locked by default and needs to be unlocked
and enabled (as descibed in 13.4.1, “Enabling the ADMIN_CENTER account” on
page 408) you can use Health Monitoring. You need to do this for all you Tivoli
Storage Manager servers.
Tip for Windows: Windows also has the EVENTLOG receiver, which sends
events to the application eventlog so that you can use the Windows Event
Viewer to monitor a Tivoli Storage Manager system. We recommend sending
the error and sever category events to the Windows Event Log.
Attention: Ensure that the ADMIN_CENTER password is known to all of your
Tivoli Storage Manager Administrators so that it does not become locked.