IBM E16RMLL-I - Tivoli Storage Manager, Руководство по внедрению

Страница: 509 / 828

Chapter 14. Advanced operations
479
2. Enable events for logging to the Tivoli receiver (TEC). The following enables
logging for severe and error messages coming from all Tivoli Storage
Manager nodes and servers to TEC. Refer to the IBM Tivoli Storage Manager
Administrator’s Guide for more information about enabling and disabling
events for logging.
enable events TIVOLI error,severe
3. In the server options file (dsmserv.opt), specify the location of the host on
which the TEC server is running. For example, to specify a TEC server at the
IP address 9.114.22.345:1555, enter the following commands:
techost 9.114.22.345
tecport 1555
4. Begin TEC event logging. You do this in one of two ways:
– To begin event logging automatically at server startup, specify the
following server option:
tecbegineventlogging yes
Or:
– Enter the following command:
begin eventlogging tivoli
14.8 Summary
We have covered details about implementing a server-to-server export and
server groups, reorganizing your database, and integrating the Tivoli Storage
Manager alerts with the Tivoli Enterprise Console (TEC) environment. In the
following chapter we increase the degree of complexity by discussing
performance tuning. Before moving into the tuning section, a good understanding
of the Tivoli Storage Manager environment and a good understanding of the
many directly related infrastructure components is very important.
Note: See the TEC documentation for instructions on removing an existing
baroc file, if needed, and installing a new baroc file.